How You Can Use Fog Machines

Fog machines are not expensive to rent or buy and they are capable of setting a spooky mood for your events. There are different layers that can be achieved like low-lying fog, hazy mist in the air as well as short bursts of smoke and the mood you want will determine the atmosphere to create. These machines are easy to use and this piece treats just that.

It is important to choose the right fog machine that will be applicable to the situation you want to create. If you want to create a low-lying fog, like the ones found in a graveyard or marsh, you can use a dry ice machine. Dry ice is frozen blocks of CO2 and it is very cold. When hot water is poured on to it, it gets converted from solid to gas and the thick fog keeps close to the ground beautifully.

For a generally misty look in the air, a hazer is really needed. Hazers are set on a timer to release fog into the air at recurring intervals. These are widespread in nightclubs as the lighting picks up the haze particles in the air and some fascinating images are made out of them. For direct bursts of smoke that can be controlled or hidden in a container or closet, a smoke machine should be used. Smoke machines come with remotes for controlling the volume of the smoke and the duration of the blast.

Furthermore, it is essential to preheat the fog machine before using. Smoke machines and hazers operate by heating the fog fluid and if the machine is not very warm, it will not have the capability to create the smoke. Majority of the machines will have an indicator light that will turn on when it is set for use which can be between 5 and 10 minutes.

You should load your fog machine with the specific brand fluid for it. If you do not use the specific brand fluid for the machine, you could clog it and it can void any warranty you may have. The reservoir of the machine should be filled with the fluid and you should avoid overfilling it. Dry ice machines require dry ice and the dry ice must be kept cool before use.

Your fog machine should be started when you are ready and if you are using dry ice to fill your event place, you will need some minutes after releasing your ice before getting a decent coverage of the place. You should avoid doing it too early because the fog could dissipate quickly.

Article Source: http://EzineArticles.com/7787858